Widemouth U-Trough

• Available for 15′ to 72′ diameter bins, with 8″ and 11″ U-Troughs.
• Flighting sizes range from 7 1/4″ to 9″.
• These troughs come factory assembled as single, double or triple hoppers to unload flat bottom storage bins.
• Powder coated
• All factory construction assures you of quality and long lasting equipment.

Widemouth Gate

• More capacity at first gate
• Allows for clumping in bin, with less restriction of grain flow
• Maximizes grain flow through 360 degree sweep
• Gates run on NyLatron rollers for less friction and ease of opening & closing operation
• Internal linkage to exterior handle gate control
• Backboard clearance adjustment
• Rack and pinion gate control on exterior bin for safe and ease of control of gate openings

Suregrip Wheel

• 18” vulcanized rubber tread design
• Gear reduction 16:1
• Positive traction
• Zero entry
• Easy to retrofit
• Adaptable to gear driven and portable sweeps
• Backboard clearance adjustment
• Standard equipment with complete u-trough package

Gearbox Sweep Drive

• External controls, and externally powered
• Internal shifting mechanisms
• Non spring loaded clutch engage
• The unload flighting drives the sweep through a double gear-box
• The gearbox and sweep can be moved from one bin to another
• Adjustable sweep length
• External Controls
• Self-propelled sweep, no need to enter bin
• Safety stop externally controlled
• Sure Grip Wheel standard equipment
• Optional upgrade from 7 ¼” flighting to 9”

Horizontal Power Head

• For use with unload u-troughs or tubes that are off the ground (24”) to allow room for portable grain auger hopper
• Can be moved from one bin to another and connected to u-trough of unload tube
• Quick detach motor mount is provided to move motor from bin to bin, or to store during the off season
• Available in electric or hydraulic drives
• Factory installed oil impregnated hanger bearing
• Factory installed shaft eliminates stop and maintains flighting clearance

Horizontal U-Through Power Head: 25 Degree Incline Power Head

• Designed to raise unloading discharge height 24” above the floor level of grain bin, this is sufficient height for portable auger hoppers to go under discharge spout
• Comes with a stand to support weight or an optional 2-wheel caddy which permits power head and flight to be moved from bin to bin
• Available in electric or hydraulic drives

Long Series Widemouth U-Trough

• Available for 54′ to 72′ diameter bins, with 11″ U-Troughs.
• 9” Flighting Diameter
• These troughs come factory assembled with four or five hoppers to unload flat bottom storage bins.
• Powder coated
• All factory construction assures you of quality and long lasting equipment.

Widemouth Gate

• More capacity at first gate
• Allows for clumping in bin, with less restriction of grain flow
• Maximizes grain flow through 360 degree sweep
• Gates run on NyLatron rollers for less friction and ease of opening & closing operation
• Internal linkage to exterior handle gate control
• Backboard clearance adjustment
• Rack and pinion gate control on exterior bin for safe and ease of control of gate openings

Bolt Together Sections

• The two U-Trough sections bolt together for convenient and easier installation
• Clevis connected gate and shifter rods for convenient and easier installation

Dual Wheel Gear Reduction

• Dual 11” rubber wheels
• Gear reduction 16:1
• Chain driven rear wheel
• Positive traction
• Zero entry
• Backboard clearance adjustment

Gearbox Sweep Drive

• External controls, and externally powered
• Internal shifting mechanisms
• Non spring loaded clutch engage
• The unload flighting drives the sweep through a double gear-box
• External Controls
• Self-propelled sweep, no need to enter bin
• Safety stop externally controlled
• Standard 9” flighting

Horizontal Power Head

• For use with unload u-troughs or tubes that are off the ground (24”) to allow room for portable grain auger hopper
• Can be moved from one bin to another and connected to u-trough of unload tube
• Quick detach motor mount is provided to move motor from bin to bin, or to store during the off season
• Factory installed oil impregnated hanger bearing
• Factory installed shaft eliminates stop and maintains flighting clearance

Elevator Head Assembly

• Low impact design
• Split hood design for easy access and serviceability (400 and 1000 BPH Series)
• Tail pulley, crowned faced with vulcanized rubber
• 12 Ga head covers
• Dust protection at all shaft openings
• Work platform attached to head section
• 3D CAD designed and manufactured

Elevator Boot Assembly

• 3D CAD designed and assembled
• 12 Ga (400 and 1000 Series)
• 10 Ga (2000 Series)
• Rod slatted – belt adjustment
• Crowned pulley head
• Shaft openings dust protected
• Easy access cleanout
• Heavy duty pillow back bearings
• Winged “easy clean” pulley

Truck Assembly

• Track welded seams
• Flanges welded in, laser aligned jigging
• Dust tight flanges
• Standard 10’ trunking, 5’ and 1’ available
• 5’ service inspection trunking
• Double legged trunking assemblies
• Goodyear pathfinder 2 ply belting

Work Platform

• Spring loaded hinged man door
• Includes full handrail
• Expanded metal safety grating floor
• Work and rest platform sizing available

Ladder and Safety Cage Assembly

• Available in 5’ and 10’ sections
• Sized for easy access
• Designed to assemble with work platforms and rest platforms
• Optional safety cage

Commercial Express

• Available in 10″, 12″, and 16″ models
• Bin dia 42′–105′

• Tractor drive
• 16″ x 4 3/4″ foam filled tires
• Motor c-faced to drive direct
• Weight bracket

• Motor mount
• Belt driven gearbox drive

• Carrier support wheels standard

• Oil impregnated wood hanger bearing

• 18″ SureGrip wheel w/ gear reduction
• 20:1 gear reduction ratio
• Vulcanized rubber tread

Features

• 10″ U-Trough Design
• Large Center Sump

• Poly sliders on sump gates

• Factory installed hanger bearing with oil impregnated bearing
• Durable, UV resistant powder coat finish
• Optional SureGrip gear reduction sweep drive
• Complete Package includes: U-Trough, flighting, gearboxes, powersweep, rack, and pinion slide gates